Portable CO2 Bike Tire Pump Kit with Presta & Schrader Valve Compatibility

Product Description Features: - Made from 100% recycled steel - Zinc coating prevents rust on the charger - Disposable (Note: Only dispose of empty cartridges) - Fits most standard 3/8" threaded CO2 bike inflator heads - Threaded, non-refillable - They have 16 grams of CO2 inside them, which means they weigh 59 grams when full and 43 grams when empty

Threaded CO2 Cartridges: - Compatible for All Threaded CO2 Inflators - Our 3/8-24 sized threads are compatible with all threaded CO2 bike tire inflators

Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to wear gloves or buy CO2 cartridges with protective sleeves to protect your hands.

CO2 Inflator, 16g Threaded CO2 Cartridge, Bike Tire Repair Kit: - Caution: Contents under pressure - Do not puncture or heat above 120°F/49°C - Do not inhale or discharge towards face or body - Keep cartridge out of reach of children - Carbon Dioxide/CO2 UN1013

Bike Tire Levers: - Our incredible high strength and durable engineered plastic tire levers are a must need for any cyclists or bikers saddlebag/rucksack

Metal Rasp: - Use the metal rasp to roughen up the inner tube. This helps the patch stick to the inner tube.

Round Punch: - Add the patch, remove the plastic from the back then add to the punctured inner tube - Hold down tightly for around 60 seconds, you can use your fingernail to ensure the patch is stuck down around every edge

Instructions: 1. Slide foam sleeve over CO2 cartridge 2. Thread cartridge clockwise into inflator head 3. Thread the 2 in 1 valve head deeply onto the Presta or Schrader tire valve 4. Slowly turn the lever counter-clockwise to release CO2 gas, up to a 45-degree angle

EVERYTHING YOU NEED FOR A FLAT: The CO2 Tire Inflation Kit gets you back on the road quicker by including solutions for all of your flat tire needs. Bike Tire Repair Set includes: 16g CO2 cartridges x 5, CO2 inflator X1, insulate sleeve X1, tire levers X 3, round punch X6, metal rasp X1.

GET BACK RIDING FAST: Use your tire levers, take the tire out of the bead, locate where the air is escaping from. Use the metal rasp tool to rough up the area around the puncture so that your adhesives have something to grip. Then press the glueless punch firmly over the hole.

SUPER COMPACT AND LIGHTWEIGHT: CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate a flat tire in a matter of seconds with little effort.

PERFECT FOR ROAD/MOUNTAIN BIKE TIRES: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approximately 40 psi. NOTE: CO2 gas is 'not' food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch; care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons - do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas.

WARNING: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low-quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly.

product information: